Industries
Why manufacturing employees leave and how to understand why
Operators, technicians and supervisors leave for reasons that sit in shifts, skills and supervision. How to ask, read the pattern by shift and act on it.
6 min readRead article
Electrical Equipment Manufacturing · Control Panel Makers
HR for Control Panel Makers: Wiring, Panel Building and Site Commissioning
A control panel maker builds the cabinets that run machines and process plants, to drawings from each customer. Wiremen, a few designers and commissioning engineers decide whether the panel works the first time on site.
Not sure what you need? Tell us about your business in six short steps and we will come to the first meeting prepared.
Share your requirementsA control panel maker builds cabinets holding starters, drives, PLCs and wiring for machines, pumps and process plants. A job begins with a customer drawing or an in-house schematic, then moves through cutting and mounting, wiring, ferrule and label fitting, functional testing and dispatch, often with commissioning on site. Panels are built one at a time, so no two jobs repeat. A good wireman reads a schematic and works neatly unprompted, and a good commissioning engineer finds the fault in a live plant. Orders bunch around project deadlines, and the shop swings between idle days and late nights. The wider manufacturing hub covers what plants share.
- Plan
- Hire
- Onboard
- Manage
- Develop
- Perform
- Engage
- Retain
- Exit
- Improve
When HR is weak in control panel makers, you may see
- Wiring quality sits with the individual
- Project deadlines bring weeks of late nights
- Helpers learn from whoever they sit beside
- Drawing revisions land mid-wiring
- Commissioning engineers live out of a bag
- Testing gets squeezed at the end
These are the places the people side of this kind of business tends to give way. The rest of this page works through them.
Who does the work in control panel makers
HR here has to work for each of these groups, not only the office. The set-up below is written with all of them in mind.
- Panel wiremen
- Mounting and fitting helpers
- Schematic and design engineers
- Continuity and functional test staff
- Commissioning engineers
- Sheet cutting and fabrication staff
- Stores and bought-out part buyers
- Project coordinators
Where HR strains in control panel makers
Wiring quality sits with the individual
Neat, tested wiring comes from the person, and rework appears at commissioning when the panel is already at the customer.
Project deadlines bring weeks of late nights
Orders bunch around customer dates, so overtime follows quiet spells, and good wiremen drift to steadier shops.
Helpers learn from whoever they sit beside
Newcomers copy the habits of the nearest wireman, good or bad, as there is no written standard.
Drawing revisions land mid-wiring
A revised schematic after wiring starts means rework and arguments over who pays for the hours.
Commissioning engineers live out of a bag
They spend long days away from home fixing faults in unfamiliar plants, and the factory under-recognises it.
Testing gets squeezed at the end
When dispatch is tight, panel checks are cut short, and faults are found on site rather than in the shop.
HR topics for control panel makers
Start with the topics that matter most here: Compensation, Payroll and Benefits; Learning and Development; Performance Management. Then work through the rest. Each topic is written for manufacturing, not in general.
Compensation, Payroll and Benefits
Salary structure, payroll inputs and a month that closes on time.
Learning and Development
Training planned from need rather than from the calendar.
Performance Management
Goals, reviews and ratings that hold up in a conversation.
HR Strategy and Workforce Planning
How many people, in which roles, by when — and what they will cost.
Organisation Design
Structure, reporting lines and who is allowed to decide what.
Recruitment and Talent Acquisition
Requisition to joining, the same way every time.
Onboarding and Probation
A first day that is the same for the fifth joiner as the first.
Employee Administration
Records, attendance, leave and the day-to-day HR that must simply work.
Career and Succession Management
Named backups for the roles that cannot be vacant.
Employee Engagement and Experience
Communication, recognition and the conditions people actually work in.
Employee Relations
Two routes — one for complaints, one for conduct — kept separate.
Policies, Compliance and Governance
Policies a manager can apply, and obligations with owners and dates.
Health, Safety and Wellbeing
Induction, records, incident reporting and follow-through.
Retention and Attrition Management
Who leaves, when, why — and which of them mattered.
Exit and Alumni Management
Resignation to relieving letter, in a defined order.
HR Technology and Automation
Records that survive people, and approvals that do not queue.
HR Analytics and Management Reporting
A short monthly pack management actually reads.
HR Operations and Governance
An HR function that runs the same way every month.
What a working HR set-up looks like
The pieces a control panel makers business puts in place, in an order that makes each easier. Open any card for the detail.
Grade wiremen by panels they can build alone
A scale from helper to senior wireman with sample panels and checks at each rung, tied to pay.
What this coversHide
Grade wiremen by panels they can build alone
A scale from helper to senior wireman with sample panels and checks at each rung, tied to pay.
What this coversHideA scale from helper to senior wireman with sample panels and checks at each rung, tied to pay. See pay benchmarks.
Write a wiring and labelling standard
One page of rules on ferrules, ducting, cable routing, labels and tidiness that all follow and juniors learn from.
What this coversHide
Write a wiring and labelling standard
One page of rules on ferrules, ducting, cable routing, labels and tidiness that all follow and juniors learn from.
What this coversHideOne page of rules on ferrules, ducting, cable routing, labels and tidiness that all follow and juniors learn from.
Plan peaks from a shared dispatch calendar
One view of order dates so overtime, extra hands and leave are fixed early.
What this coversHide
Plan peaks from a shared dispatch calendar
One view of order dates so overtime, extra hands and leave are fixed early.
What this coversHideOne view of order dates so overtime, extra hands and leave are fixed early. Shift and leave planning uses it.
Set rules for commissioning travel
Travel days, allowances and rest written once so nobody argues each trip.
What this coversHide
Set rules for commissioning travel
Travel days, allowances and rest written once so nobody argues each trip.
What this coversHideTravel days, allowances and rest written once so nobody argues each trip. Pay processing applies them.
Fix a test step before dispatch
A checklist signed by a checker other than the wireman, with time held for it in every project plan.
What this coversHide
Fix a test step before dispatch
A checklist signed by a checker other than the wireman, with time held for it in every project plan.
What this coversHideA checklist signed by a checker other than the wireman, with time held for it in every project plan.
Start by checking where you stand
Before changing anything, find out what is true today. These checks take an afternoon and tell you which of the topics above to start with.
Share your requirements- Ask your senior wireman which three habits they would teach every helper.
- Count panels reworked after commissioning in the last quarter.
- List the next two months of dispatch dates and the hours they imply.
- Ask a commissioning engineer how many nights they spent away last month.
- Check who signs off panel testing today.
- Confirm with a qualified professional the licences, test-record keeping and staffing duties a switchgear and panel shop carries.
Confirm with a qualified professional. What applies to you depends on your business, your state and your arrangements, and it changes. This page describes practice. It does not state a legal position.
How GullyHR helps
The services below fit this kind of business best. Each starts by recording where you stand, and every later report compares against that. We do not promise outcomes.
- Compensation benchmarking
Skill grades for wiremen and commissioning engineers set against nearby panel shops.
- Attendance, shift and leave
Overtime and leave planning for project-driven peaks.
- Learning and development process
A route that turns helpers into dependable wiremen.
- Performance management
Right-first-time measures that do not punish honest rework reporting.
Start with a free conversation, or see the paid HR Diagnostic.
Our HR transformation approach
- 1
Assess
Understand the business, its workforce, current processes and HR challenges.
- 2
Identify gaps
Find the missing, weak, inconsistent or person-dependent processes.
- 3
Design
Create the structure, processes, policies, SOPs, dashboards and systems needed.
- 4
Implement
Help HR and department managers actually adopt the new system.
- 5
Automate
Digitise repetitive and approval-based workflows where it is worth doing.
- 6
Measure
Track hiring, attendance, employee cost, performance, training and attrition.
- 7
Improve
Strengthen the people-management system continuously, not once.
Blogs worth reading first
From the GullyHR blog: one on HR in manufacturing, and one on each of the topics this page points to.
HR Management
Salary bands for SMEs: building grades when you have never had any
Most salary structures grew one negotiation at a time. How to build grades and bands from what you already pay, without repricing everybody at once.
8 min readRead article
HR Process
The training calendar nobody attends: fixing the learning and development process
A calendar of courses, a budget spent by March and no record of what any of it changed. What a learning and development process contains when it starts from need rather than from the catalogue.
7 min readRead article
HR Management
Why employees need clear expectations before performance reviews
A review can only judge what was agreed beforehand. How to set expectations that are specific, written and revisited, so the review stops being a surprise.
5 min readRead articleMore on the GullyHR blog.
Questions owners ask
Pay for skill, plan the peaks so late nights are not constant and give senior wiremen a part in training. They move for steady work and respect.
Pair each with a good wireman and a written standard, give small tasks first and check the work. Learning should not be left to chance.
Agree a change process with the customer, record the extra hours and tell the wiremen early. It eases tempers and gives you the cost.
Set travel and rest rules, recognise the work in grades and appraisals and give them a way to share site lessons with the shop.
No. Share the plan early, use trained part-time hands and spread work across the month where customers allow.
First we would ask your senior wireman what every helper should learn, count panels reworked after commissioning and set upcoming dispatch dates against capacity. A wireman grade scale with a wiring standard is a natural first job, and scope goes into writing for your sign-off.
More on HR for manufacturing
All 8 business types in electrical equipment manufacturing · Find another business type
Transformer ManufacturersElectric Motor ManufacturersSwitchgear ManufacturersCable and Wire ManufacturersIndustrial Lighting ManufacturersPower Distribution Equipment MakersCompensation, Payroll and Benefits in manufacturingLearning and Development in manufacturingPerformance Management in manufacturing