Skip to main content
GullyHR

HR delivery and support · Aluminium profile manufacturers

Talent Acquisition Services for Aluminium profile manufacturers

Talent acquisition is the work of finding, screening and presenting candidates for permanent roles you have approved, and following them through interviews, the offer and joining. GullyHR runs it per role from a written brief, as one of its hiring services, separate from recruitment process consulting. Each search is scoped in writing, and selection, compensation and the offer remain your decisions.

A recruiter and hiring manager discussing candidate folders in a welcoming interview room.

Talent Acquisition Services for Aluminium profile manufacturers

What this looks like in your business

An extruder reaches for talent acquisition when a permanent seat on the floor stays empty and the press suffers for it: a second operator for the largest press, a die correction technician, a quality inspector who can read a profile drawing, or a supervisor for the anodising line. These roles are hard to fill because the skill sits on the shop floor, not on a CV. GullyHR works from a written brief for each role, sources and screens candidates for permanent posts, and presents a shortlist with a reason for each name.

Why press and die room hires are hard

Few trades carry as much value in one person as a press operator, and few are as hard to judge from a conversation. A good operator reads the billet, the die and the sound of the press, and knows when a run is going wrong before the profile shows it. Die room skill is slower still: correction work is learnt beside a senior technician over years, so a candidate with good words and little practice is easy to mistake for a strong hire. Candidates come from other extruders, so a vacancy can set you against a neighbouring plant, and pay is compared quickly. Heat, noise and weight also thin the pool, and anodising and powder coating lines need people who accept routine and chemical discipline. A rushed hire at the press costs scrapped billets and bent lengths for weeks. A hire who leaves after a month costs the crew's confidence. Talent acquisition exists to slow the first step down just enough to be sure about the role before any search begins.

What the written brief settles first

GullyHR starts with a brief written with you and the supervisor who will work beside the new person. For a press operator, the brief says which press and which profile families, whether the person will run alone or under a lead, which shifts, and what a good first month looks like. For a die room technician it names the dies and tasks the person must handle unsupervised and the ones they will learn. For a quality inspector it names the instruments and drawings. Pay range, location and who makes the final choice are written before outreach begins. GullyHR then picks sourcing channels for the role, not by habit: referrals from the trade, other extrusion and fabrication plants, technical institutes for helpers, and direct approaches. Applications and replies are handled in one place, and each candidate is screened against the same written criteria. The shortlist arrives with a short reason for each name, including what is not yet proven. Where a candidate cannot yet be judged on paper, the brief says so, and a supervised trial is planned before anyone is told yes.

A worked example for a second press operator

Suppose a plant with two presses needs a permanent operator for the larger one, because the only trained person has taken on every leave day and shift change. The owner and the production supervisor sit with GullyHR and write the brief: profile families run, billet size, shift pattern, a trial run before offer, and a pay range agreed in advance. Screening finds three candidates. One has strong words but has only worked as a puller. One has run a similar press for years but left two plants within a short time, which GullyHR flags for a reference conversation. One is a younger operator with a good record on smaller presses. GullyHR presents all three with reasons. The supervisor does a floor discussion and a supervised trial with the best two. The owner picks, sets the offer and decides the start date. GullyHR follows the candidate through the offer and joining, and records what the new operator was told on day one. Throughout, GullyHR keeps the supervisor informed of each step, so the person who will manage the new operator has met the candidate before any offer is made.

What stays with you and what we hand over

Selection, compensation and the offer remain your decisions, and the supervisor's view of a trial run matters more than any shortlist. Settle early who signs off a brief, who interviews, who holds the right to offer and who prepares the first day: the induction, the safety briefing for hot and chemical work, the person who will teach the new operator, and the die room helper who will shadow them. Keep the brief, the screening notes, interview feedback and offer in one file, so a later hire for the same seat starts from what you learnt. GullyHR handles outreach, screening, scheduling and follow-up for permanent roles only; it does not supply temporary or contract crew. Any reference you take on a candidate, and any terms of the offer that touch local labour rules, are confirmed by your own adviser. The new hire's first weeks are owned by your supervisor, with GullyHR checking in on joining. The brief and notes remain yours, so the next time a press seat opens you begin from what is already written and proven.

The first weeks

  1. 01

    Sit with the production supervisor and write a one-page brief for the role: press, profile families, shift pattern, supervision and the first month's expectations.

  2. 02

    Agree the pay range and who makes the final choice, and record both before any outreach to candidates begins.

  3. 03

    Name the sourcing routes for the seat, such as other extrusion plants, trade referrals and technical institutes, and approve the outreach wording.

  4. 04

    Hold screening conversations against the written criteria and prepare a shortlist with a reason for each name and any open question.

  5. 05

    Arrange a floor discussion or supervised trial for the final candidates and prepare the day-one induction and safety briefing before the offer goes out.

The operating context

Turn an approved vacancy into a defensible shortlist

Aluminium profiles for windows, doors and structures are pushed through dies under heat and pressure, then cut, aged and finished. Press crews, die staff and finishing lines work in sync, and heat and heavy billets bring risk.

Extrusion press operatorsPuller and run-out table crewDie correction and die room techniciansStretching, cutting and ageing oven operatorsAnodising and powder coating line staffPacking and loading helpers
A plant HR officer and production colleagues planning shift coverage at a factory briefing station

The decision to work through

Confirm role outcomes, location, pay range and assessment criteria before sourcing permanent employees. Workforce to consider: Extrusion press operators, Puller and run-out table crew, Die correction and die room technicians.

Records to prepare

Approved role brief, shortlist evidence and interview feedback. Confirm which records are held by the managers of Extrusion press operators, Puller and run-out table crew, Die correction and die room technicians.

An exception to test

Review a candidate who meets credentials but lacks evidence of the required work; the client retains selection and offer approval.

Which parts of your business should the scope cover?

The right workforce and approval structure depends on the operations you run. Confirm which of these apply, and whether they share one HR process.

  • Extruders of architectural sections for windows, doors and partitions
  • Anodising and powder coating extruders selling finished lengths
  • Curtain wall and structural glazing section makers
  • Industrial profile makers for conveyors, machine frames and enclosures
  • Solar mounting structure and rail section suppliers
  • Furniture, kitchen and wardrobe profile makers

When to consider this service

  • A manager needs a person soon, nobody has the time to source, and the search starts with a message to a few contacts.
  • A role is briefed verbally, CVs arrive that do not match what the manager had in mind, and the brief is quietly changed halfway through.
  • Profiles reach the hiring manager without anyone having checked them against the role, so the manager screens as well as interviews.
  • Interview slots are arranged over messages and calls, and candidates wait for feedback because nobody owns the follow-up.

Businesses this service is designed for

  • Founder-led businesses where the founder still screens every profile and has no time to source as well.
  • Companies without an in-house recruiter that now have several open roles and no one to run the search.
  • Businesses opening a new site, shift or team that need several permanent hires organised together.
  • Companies that have a recruitment process, or are building one, and want sourcing support that follows it.

Responsibilities we can take on

GullyHR talent acquisition is permanent recruitment support for the roles you need to fill. We start from a written brief agreed with the hiring manager, source candidates through the channels agreed for the role, screen them against the criteria in the brief, present a shortlist and coordinate the interviews. We then follow up on the offer and on the joining, and report on progress in a format agreed at the start. It is one of our hiring services and is scoped separately from our recruitment process consulting. You supply the role, the approval to hire, the compensation range and quick decisions from the people who interview. Every selection decision, the offer and its terms stay with you.

A role is briefed in writing before any search begins.

Requirement intake with the hiring manager: why the role exists, what it is accountable for, the experience and skills that matter, the location, the reporting line and the approvals already in place.

The role is defined in terms a candidate can understand.

A role definition or job description drawn from the brief, so the outreach, the screening and the interview all describe the same job. Where a description already exists, we work from it.

Sourcing channels are chosen for the role, not used by habit.

A sourcing plan that names the channels agreed for the role, which can include job portals, professional networks, referrals, your own applicant records and recruitment partners, and who is responsible for each.

Outreach and applications are handled in one place.

Candidate outreach, incoming applications and their status kept in a single tracker, so the hiring manager can see where each candidate stands without asking for an update.

Screening checks each candidate against the same criteria.

A review of each profile and a screening conversation against the must-have and good-to-have points in the brief, with short notes recorded for each candidate who is put forward.

A shortlist arrives with a reason for each name.

A shortlist in an agreed format that sets out, for each candidate, how the profile matches the brief and what is still open, so interview time goes on people who fit the role.

Interview slots are coordinated and feedback is collected.

Scheduling between candidates and interviewers, reminders, and collection of interviewer feedback in an agreed format, so decisions are not left waiting.

Somebody follows up on the offer.

Communication with the selected candidate while you finalise the offer, including questions the candidate raises, with the offer, the compensation and the terms decided and issued by you.

Somebody stays in touch from acceptance to the first day.

Agreed follow-up between acceptance and joining, the documents the candidate needs to provide, and a note to you when the candidate raises a concern or a joining date moves.

You see progress in a regular, agreed report.

Open roles, candidates at each stage, pending decisions and where candidates leave the process, reported in a format and at intervals agreed at the start of the engagement.

Who carries the work, and who decides

The client owns employee records and approves policies, spending and employment decisions. GullyHR's assigned responsibilities are documented in the engagement.

Role brief

GullyHR
Takes the requirement from the hiring manager and writes it into a brief for confirmation.
Your team
Confirms the brief, the approved headcount and the compensation range.

Sourcing

GullyHR
Plans and runs the sourcing through the channels agreed for the role.
Your team
Shares referrals, existing applicant records and access to systems where agreed.

Screening and shortlisting

GullyHR
Screens candidates against the brief and presents a shortlist with notes.
Your team
Reviews the shortlist and tells us which profiles to take forward.

Interviews

GullyHR
Coordinates schedules and collects feedback in the agreed format.
Your team
Conducts the interviews and gives feedback promptly.

Selection and offer

GullyHR
Supports communication with the candidate while the offer is finalised.
Your team
Makes the hiring decision, sets the compensation and issues the offer.

Joining follow-up

GullyHR
Stays in touch with the candidate and informs you of changes.
Your team
Completes joining formalities and onboarding.

Agree the workload, operate and review

Confirm the recurring workload and current backlog, identify the information needed to start, and agree which tasks GullyHR carries and which decisions remain with the client.

  1. 01

    Agree the scope

    We confirm which roles, levels and locations are covered, the engagement type, the channels to be used, who communicates with candidates and what is reported. The scope is written down before work begins.

  2. 02

    Take the requirement

    A conversation with the hiring manager to capture the role, the must-have and good-to-have requirements, the compensation range you have approved and the interview panel. The result is a written brief that you confirm.

  3. 03

    Plan the sourcing

    We set out the channels for the role, how candidates are approached, what is said about the role and the business, and how applications are tracked. Where you already have a recruitment process, we follow its order and stages.

  4. 04

    Source and screen

    Candidates are approached and applications reviewed. We hold screening conversations against the brief and keep notes on each candidate, so the reason a profile is put forward, or not, can be explained.

  5. 05

    Present and coordinate interviews

    A shortlist goes to the hiring manager with a note on each profile. We coordinate interview slots, brief candidates on the format, collect feedback in the agreed form and pass the result back to you for a decision.

  6. 06

    Follow up offer and joining

    While you finalise the offer we handle candidate communication and questions. After acceptance we follow up on documents and the joining date, and tell you if anything changes.

  7. 07

    Report and review

    We share the agreed report, record where candidates came from and where they left the process, and review the brief and the channels with you before the next search or stage.

Review completed work, unresolved approvals and upcoming demand on the agreed service calendar. Keep a handover record so responsibilities can return to your internal team.

Agreed activities, records and reporting

  • A written role brief confirmed by the hiring manager, with must-have and good-to-have requirements.
  • A role definition or job description in the format agreed for the engagement.
  • A sourcing plan naming the channels and responsibilities for each role.
  • A candidate tracker showing each candidate and the stage reached.
  • Screening notes for each candidate put forward, recorded against the brief.
  • A shortlist with a short summary of how each profile matches the role and what remains open.
  • Interview scheduling and feedback records for each candidate interviewed.
  • A follow-up log covering the offer stage and the period up to joining, with a progress report in the agreed format.

What your team provides

  • The role, the approval to hire and the compensation range.
  • A hiring manager who confirms the brief and the criteria.
  • Quick decisions and written feedback from everyone who interviews candidates.
  • The offer itself and its terms, which stay with you.

Share personal records only after the scope, access and handling arrangements are agreed.

Measures to agree before work starts

These are measures to track against your baseline, not promised results. Agree definitions, record sources and review dates at the start.

  • Time-to-hire

Tools and implementation dependencies

Candidate stages, screening notes and interview feedback can be recorded in the applicant tracking tool you already use, in the GullyHR recruitment module, or in a shared tracker, whichever is agreed for the engagement. Keeping the record in one place lets the hiring manager see the current stage of each candidate, and lets the joining details carry into the employee record and onboarding instead of being collected again. Software is not required to take the service.

Read the full talent acquisition services service guide →

Agree the engagement before work starts.

Single-role search

Sourcing and placement support for one permanent role, from the written brief to the joining follow-up. For a business with a particular position to fill.

Hiring drive

Several roles, or several positions in the same role, organised together, for instance for a new site, team or shift. Sourcing, screening and interview coordination are planned across the set.

Ongoing hiring support

Sourcing and coordination support as roles open over a period, with a regular report on open roles and candidates at each stage. Where hiring is continuous and you want the whole process run for you, recruitment process outsourcing may suit better.

Alongside recruitment process consulting

Talent acquisition run on the process designed in our recruitment process consulting, so the brief, the screening and the records follow the stages your managers already know.

Scope and exclusions

  • Agree the activities, volumes, availability, response expectations, approvals and escalation contacts in writing. Fractional support is limited to its mandate; it is not unlimited daily cover. Recruitment is for permanent positions.
  • You need contract or temporary staff supplied. We recruit for permanent roles only.
  • You want a guaranteed placement within a set time. The search follows the brief and no outcome is promised.
  • You want candidates' backgrounds verified. That is outside what we do.
  • You hire at volume every month and need a running operation, which a different arrangement suits better.
Confidentiality, specialist review and accountability

Limit access to the records needed for the agreed work. Confirm authorised users, secure sharing, retention and return or deletion arrangements before exchanging personal information.

Applicability depends on locations, workforce arrangements and the issue under review. Confirm applicable requirements with your qualified adviser before adopting policies or employment actions; this service is not a legal certification.

Employment-law opinions, statutory filings, professional or clinical standards and safety-critical technical decisions require the appropriate qualified professional; include those dependencies in the scope.

Questions before you decide

GullyHR sources and screens against a written brief and presents a shortlist, but proof of skill on the press is your supervisor's call. We arrange the floor discussion or supervised trial, share what we learnt from references and past roles, and say what is not yet shown. You and your supervisor choose, and you make the offer. Your supervisor sees the notes first.

Discuss ongoing support

Tell us the teams and locations involved, what is happening today and what you want this work to resolve.

Start with your business need

What does your HR team need to solve?

Tell us your industry, team size and the issue you want to address. Bring one example of where work gets delayed or ownership is unclear, and the deadline or decision you are working towards.

  • A free first conversation with an HR practitioner
  • A clear scope and fee before any paid work
  • A practical next step for your business

Let’s start with your business

Share your contact details and the HR challenge on your mind. We’ll help you find the right starting point.

Include your country code, for example +44 or +1. Indian numbers can be 10 digits.

Your details stay private. Privacy policy